Driver Shaft Length

Follow Thread

By CRickard

  • 0 Likes
  • 17 Replies
  1. CRickard

    CRickard
    Metro Detroit

    I was recently fitted for a new driver shaft from CC. We didn't talk about shaft length and I kind of had a brain fart. When the order was placed, I didn't ask what they were putting for length. Once the shaft came I put in into play and something didn't feel right. So I looked at the order summary and realized that the length is 45.5 in. I usually game a 44.5in. shaft in my driver.

    My question is should I just have them cut it down an inch or see if they will replace it? I realize if I cut it down a bit, it could change the characteristics of the shaft. Thought?

  2. NMortimer

    NMortimer
    Hertfordshire, UK

    Yes, it will affect the characteristics as you know. As it's a new driver surely you must take it back and ask them to make the necessary changes, length/swing weight etc. Fingers crossed they will allow your brain fart, it's not as if they don't have them or nobody has asked for this before. Good Luck
  3. Barry M

    Barry M
    Reno, NV

    I'm surprised they didn't check your original first. Just cutting it will affect swing weight. If you want it an inch shorter have them run a fitting with the shorter length. Let them cut or replace it so they can get the swing weight dialed in.
  4. Joseph M

    Joseph M
    Saint John, New Brunswick

    Yes, you should return it for a replacement- cutting it down will reduce swing weight by 12 points requiring 24 grams or weight added to the head to bring it back up to its current swing weight. Send it back and they will figure out how to return a properly weighted club @ 44.5 inches. I would also check back/confirm with your fitter if a specific swing weight was requested and have them build it to meet that specification- if they can't meet it they will let you know what can be achieved.
  5. Lou G

    Lou G
    San Diego, CA

    Joseph M said:

    Yes, you should return it for a replacement- cutting it down will reduce swing weight by 12 points requiring 24 grams or weight added to the head to bring it back up to its current swing weight. Send it back and they will figure out how to return a properly weighted club @ 44.5 inches. I would also check back/confirm with your fitter if a specific swing weight was requested and have them build it to meet that specification- if they can't meet it they will let you know what can be achieved.

    A 1/2” decrease In length = 3 swingweight points. A standard Lamkin grip is 52g. Winn Excel RF is 43g; the Excel increases swingweight almost 2 points (5g = 1 point). For shafts, 10g weight = 1 point. For head weight it is 2g = 1 point.


    I have a 913D2 driver 44” with Diamana 62 stiff, Excel RF oversize grip, 14g headweight and it comes out D3. I set it to B3.
  6. Chuck Z

    Chuck Z
    Mt Pleasant, SC

    Military
    I agree with Barry. With most fitters, they do ask you to bring in your current equipment and find out what you are playing. Standard length on a driver is 45 inches. I would ask the fitter what length shaft they fitted you for. My fitter only orders they shaft they we are using during the fitting. If they did indeed make a mistake, I would ask them to correct it at no charge. Too err is human as the saying goes.
  7. Bomber3

    Bomber3
    Lake St Louis, MO

    Military
    If you look at the custom options booklet the current standard shaft lengths for the TSR2, 3 & 4 is 45.5". The standard shaft length for the TSR1 is 45.75".
  8. Dwayne N

    Dwayne N
    Island, KY

    i would definitly check with the fitter to see exactly what shaft was ordered. And if it isn't right ask for it to be corrected.
  9. Chris92009

    Chris92009
    Ohio

    Cut it down however you will need to add some lead tape to the head...not a big deal.

    Cheers!
  10. Lou G

    Lou G
    San Diego, CA

    Chris92009 said:

    Cut it down however you will need to add some lead tape to the head...not a big deal.

    Cheers!

    There are quite a few headweights on eBay for 913 and 915 drivers, fairways and hybrids. Standard weight is 9g. The 913 weights are up to 23g. 915 go up to 17.
  11. Chris92009

    Chris92009
    Ohio

    Chris92009 said:

    Cut it down however you will need to add some lead tape to the head...not a big deal.

    Cheers!

    This was dependent on the original swing weight (if requested) and length of the club. Regardless a copper color coded weight and lead tape will do the job. If you wish to have a clean sole begin the process with returning the club...

    IMHO
  12. John T

    John T
    Youngstown, OH

    If the driver is a TS, TSR, etc., all you would need to do is change the weight on the head, Titleist can supply that.

    Titleist standard shaft length is 45.5". Per their charts, the head would have a standard added Surefit Weight. If you cut 1" to make it 44.5", Titleist suggests that you change the weight to a +4 grams, which should keep the swingweight close to standard. (source - Titleist Fitting Manual)

    Therefore, I suggest you see a Titleist fitter who should have the different weights for you to try.
  13. Rick S

    Rick S

    I’m interested in shortening my driver as well (TSi1), and I’m well aware of the need to add weight when you do, but my question is that if you shorten is there a need to adjust loft to compensate for the shorter length as well?
    Thanks
  14. Joseph M

    Joseph M
    Saint John, New Brunswick

    Shortening length may result in a loss in distance with a gain in driving accuracy, however, if it also increases your center hits driving length (average) may be maintained. Its not likely loft will need adjustment but if a noticeable change in trajectory results you can always make adjustments for further avaluation.
  15. AVelky

    AVelky

    I am 5 ft 11/2 inch tall . What shaft length is appropriate for me. I an a older lady with a slow swing speed
  16. Dale V

    Dale V
    Surprise AZ

    Longer shafts give greater leverage for speed but shorter shafts are usually easier to swing consistently for center strikes. Play the longest you can control. The only way to know for sure is through experimenting with different lengths at the range or using an indoor facility with TrackMan. Everyone is a bit different so go with what works best for you.
  17. Don O

    Don O
    Madison, WI

    Dale V said:

    Longer shafts give greater leverage for speed but shorter shafts are usually easier to swing consistently for center strikes. Play the longest you can control. The only way to know for sure is through experimenting with different lengths at the range or using an indoor facility with TrackMan. Everyone is a bit different so go with what works best for you.

    As well as getting a properly weighted club overall. This involves the head weight as either a GT-1 or GT-2, shaft weight and adjusting swing weight - how heavy does the “rock at the end of the string” feel when swung. These are all variables in how well you can control the swing. A qualified fitter will find your best option and not just lead you over to sets of clubs all matched in pastels.
  18. Tim S

    Tim S

    the normal shaft is 45.5" nowadays and its a little dirty secret of the manufacturers to show distance gains. The reality is very few people under 6' tall should be playing such a long shaft

    also, the VERY BASICS of fitting 101 should be to measure for length and weight.......once you establish this, you can then be fit for grips and everything else in between....length is the first thing you should be fit for.....

    i am 5'10' and play a 44" driver shaft...ive gained speed and accuracy and hit it just as far as the 45.5 but much more accurate.

    cut it down

Please login to post a comment.

Sign In

Haven't registered for Team Titleist yet?

Sign Up

Find a golf store near me